BIVY POP TOP CAMPER SHELL

Each camper is built for your individual truck. Meaning it's a really tight fit made for narrow treed roads. This fit also allows you to maximize usable space, whether you're hauling wood or building out your DIY dream!

It flips up! It has exterior locks! It has gas springs!You can add a window in it! ... See below.We can also do half barn doors as an add on... See below.

Our canvas is water PROOF. It's also super strong, super abrasion resistant, and can handle high winds!

Each side of the camper has two windows. They have a fixed layer of bug netting and the canvas velcros open and closed on the interior. If you want a clear velcro vinyl layer, see add-ons below.

We use velcro, cause you know, zippers fail.

All aluminum construction means the camper is light and ready for years of use. The only wood used in our campers is for accents and are non structural.

There is Velcro loop around the top and bottom of the canvas (interior) that makes adding a head liner or insulation layer easy.

All aluminum construction means they are dang light! Windows and other add-ons will add weight, but still you're pretty much guaranteed a sub 375lb camper no matter what you get!

Mill aluminum is super nice but might tarnish without proper care. If you live in the desert or don't mind occasionally treating it, this is a good option.

White painted aluminum skins are super nice and require little to no maintenance! The paint is fairly thin so keep that in mind if you plan on navigating narrow trails with trees, as it could potentially scratch.

If you want minimal maintenance and high scratch resistance, check out anodized skins as an add on feature below!

- Super strong roof - Made to carry solar, snow, a kayak or a SUP- DIY friendly

- We build our campers with DIYers in mind. Easy to insulate 1" framing. Tubing can be used as studs to build onto with ease.- Vertical walls

- Makes the camper easy to build out and is super spacious!- Vertical pop - More space for more friends and activities. Trust us, the wedge is lame.

Nothing like celebrating NEW CAMPER DAY with the crew. We have coffee, water, and beer! We also know tons of camping spots around town.

Anodized skins are corrosion and scratch resistant. Good for people who are coastal and or live in a place where they use salt/mag-chloride on the roads. The sides require little maintenance and look amazing!

Barn door halves are incredible!

Leave one open for the dog!

Stand on your tailgate with nothing above you (unlike the standard flip-up rear hatch).

Add a clear layer to the canvas. This allows light in while keeping the weather out! Velcro is used to secure while closed. Sewn between bug netting and solid canvas layer.

Roof rails help you haul more stuff or carry a boat.

Standard length is 66" for $325.

Plus sized is 82" for $400.

You can also ask for full length, which requires 2 sets.

Add towers and Vortex Cross bars to your Rhino rack rails.

We will preinstall these, so your camper is ready for a canoe at pickup!

65" wide for midsize trucks - $565
71" wide for fullsize trucks - $615

Side access is super nice! These flip up and are held up by a gas strut. Exterior Locking.

Throw your groceries in or grab a bike helmet with ease!

Note, best placed towards front of camper if you're getting the barn door halves. This way the doors don't interfere.

This model is exhaust only, so if you crack a window, it will draw air through.

Maxxair Model : 4401M

-4 SPEED fan motor
-Manual lift lid and lid locking mechanism
~3" profile when lid is closed

Note: completing the wiring is left to the customer.

This model is intake and exhaust, so if you crack a window, it will draw air through or you can have it blow on you while you sleep!

Maxxair Model : 4000K

-10-speed intake and exhaust fan
-Manual Opening
-White lid
~4.5" profile when lid is closed

Note: completing the wiring is left to the customer.

This model is intake and exhaust, so if you crack a window, it will draw air through or you can have it blow on you while you sleep!

-Built-In rain cover provides full time protection, while fan is on or off
-Use the fan while it's raining or when driving Powerful 10 speed reversible fan with thermostat
-Remote control with programmable thermostat
-Removable interior insect screen
~5.5" profile when lid is closedMaxxair Model : 7500k

Note: completing the wiring is left to the customer.

Add a MC4 positive and negative connector solar port to the roof. We wire them back to the driver's side rear of the camper for easy hook-up for whatever system you install down the road.

Note: 10AWG 600V wire

Center-slide front window.

38" Wide x 13" High

Center slides open to 14" wide x 13" high

Second image demonstrating a 200lb self proclaimed "body builder" passing through the window.

If you want a non-sliding window in the front or rear, this is the one!

24" Wide x 14" Tall

We can do a couple different windows in the sides.

24" Wide x 14" Tall
or
20" Wide x 12" Tall

Note: Since the Bivy has a shorter sidewall height than our normal cabover campers, some window options are limited and might not be possible.

Put some windows in your barn doors! If you have a window in the front, you can see the car behind you!

Note: Roughly 12"H x 20"W

Note: Since the Bivy has a shorter sidewall height than our normal cabover campers, some window options are limited and might not be possible.

20" Wide x 12" Tall. Half of it slides open. There is bug netting on the part that opens, so you don't have to worry about mosquitos getting in or your dog getting out!

Added to barn doors - $450 for the set
Added to side hatch or side wall - $250 each

Note: Since the Bivy has a shorter sidewall height than our normal cabover campers, some window options are limited and might not be possible.

Show the people behind you that you mean business!

Note: completing the wiring is left to the customer.

They make opening and closing the camper extremely easy.

Though these are recommended on our cabover campers, the Bivy is a little different. Since the Bivy doesnt have a cabover, the roof is lighter, making opening and closing easier than our conventional campers.

Would I want them on my Bivy, absolutely, are they 100% necessary, no.

Awning channel is awesome!!!! This is a great option if you'd like to make your own awning instead of buying a bulky, expensive one.

You can stitch any tarp material you want to a "8.5mm keder rope" and slide an awning onto your camper!

Both driver and passenger sides - $150 Total

AT Overland NATO Jerry can holder mounted wherever you want!

We have mounts for 5 or 10 pounders. Mount them on the side!

5lb = 8" diameter
10lb = 9" diameter

Composite-quilt insulation liner that hangs inside the camper canvas. It creates dead airspace and keeps you warmer/colder.

We recommend you take it down before closing the camper top.

Four interior "puck" lights added to the interior of the camper.

These are wired to the rear driver's side corner of the camper.

Dimmable.

Two spaced roughly 2 feet from the front of your camper and two spaced roughly 2 feet from the rear.

Note: completing the wiring is left to the customer.

Clean up the roof bars with a fabric headliner!

Gray stretch fabric.

R-6 insulation added to the roof. This is commonly paired with a headliner.

Do you want to hang stuff from your ceiling?

The option makes it easy to carabiner stuff to your roof!