OVRLND POP TOP CAMPER SHELL

CURRENT ESTIMATED LEAD TIME - 4 MONTHS / 16 WEEKS - Updated 08/01/2023

CLICK HERE TO GET IN LINE - MIDSIZE $500 DEPOSIT

$8400 Base

5' & 6' beds - Tacoma, Frontier, Colorado, Canyon, Gladiator, Ranger

CLICK HERE TO GET IN LINE - FULLSIZE $550 DEPOSIT

$9400 Base

5.5' & 6.5' beds - Tundra, F150, F350, F250, Titan, Chevy/GMC/Ram 1500/2500/3500

CLICK HERE TO GET IN LINE - 8FT $600 DEPOSIT

$9700 Base

Any 8' Model

To get on our build list pay the appropriate deposit above. This non-refundable deposit is applied to your final invoice. Once deposit is received, we will reach out with more info regarding your new camper cabin!

Read our Process page for more info on how we build the lightest off-road campers out there!

NOTE: We will NOT build for the Honda Ridgeline, Baja, Ford Maverick or Sport Trac

Standard Features - Press + symbol below to see pictures and descriptions

Each camper is built for your individual truck. Meaning it's a really tight fit made for narrow treed roads. This fit also allows you to maximize usable space, whether you're hauling wood or building out your DIY dream!

Honeycomb composite material is a game changer! Lighter, stronger, and has the added benefit of keeping you warmer! Load tested for 500lbs and wide enough for the family!

Two sheets. There is one fixed platform and one platform that extends to create the full 80" long bed.

Midsize trucks: ~ 61"Wx80"L extended and 61"Wx40"L collapsed

Full-size trucks: ~ 68"Wx80"L extended and 68"Wx40"L collapsed

*Due to material sourcing we are unable to extend the cabover or make the beds longer than they currently are.

It flips up! It has exterior locks! It has gas springs!

You can add a window in it! ... See below.

We can also do half barn doors as an add on... See below.

Our canvas is water PROOF. It's also super strong, super abrasion resistant, and can handle high winds!

Each side of the camper has two windows. They have a fixed layer of bug netting and the canvas velcros open and closed on the interior. If you want a clear velcro vinyl layer, see add-ons below.

We use velcro, cause you know, zippers fail.

All aluminum construction means the camper is light and ready for years of use. The only wood used in our campers is for accents and are non structural.

There is Velcro loop around the top and bottom of the canvas (interior) that makes adding a head liner or insulation layer easy.

8" cabover height (Total height is 11" including the 3" roof).

With 8" you're able to have two 2.5" mattress halves stacked when the roof is closed and the bed-slide is stowed. We can add an inch or two to this if you want to leave more bedding in the cabover area when the roof is closed.

All aluminum construction means they are dang light! Windows and other add-ons will add weight, but still you're pretty much guaranteed a sub 375lb camper no matter what you get!

Mill aluminum is super nice but might tarnish without proper care. If you live in the desert or don't mind occasionally treating it, this is a good option.

White painted aluminum skins are super nice and require little to no maintenance! The paint is fairly thin so keep that in mind if you plan on navigating narrow trails with trees, as it could potentially scratch.

If you want minimal maintenance and high scratch resistance, check out anodized skins as an add on feature below!

- Super strong roof - Made to carry solar, snow, a kayak or a SUP

- DIY friendly - We build these with DIYers in mind. Easy to insulate 1" framing. Tubing can be used as studs to build onto with ease.

- Vertical walls - Makes the camper easy to build out and is super spacious!

- Vertical pop - More space for more friends and activities. Trust us, the wedge is lame.

Nothing like celebrating NEW CAMPER DAY with the crew. We have coffee, water, and beer! We also know tons of camping spots around town.

Add-On Features - Press + symbol below to see pictures and descriptions

Anodized skins are corrosion and scratch resistant. Good for people who are coastal and or live in a place where they use salt/mag-chloride on the roads. The sides require little maintenance and look amazing!

Barn door halves are incredible!

Leave one open for the dog!

Stand on your tailgate with nothing above you (unlike the standard flip-up rear hatch).

Add 2" to the cabover height for the ability to leave more bedding up top when camper is closed.

Standard bedding height is 8" as shown. This can become 10".

Add a clear layer to the canvas. This allows light in while keeping the weather out! Velcro is used to secure while closed. Sewn between bug netting and solid canvas layer.

Roof rails help you haul more stuff or carry a boat.

Standard length is 66" for $325.

Plus sized is 82" for $400

You can also ask for full length, which requires 2 sets.

Side access is super nice! These flip up and are held up by a gas strut. Exterior Locking.

Throw your groceries in or grab a bike helmet with ease!

Note, best placed towards front of camper if you're getting the barn door halves. This way the doors don't interfere.

Like the flip up except it flips down. Held up by a cam strap at any angle. You can also lean it against your truck. You can get wild and add a counter to the flip down to make a lower cook surface. Exterior Locking.

Note, best placed towards front of camper if you're getting the barn door halves. This way the doors don't interfere.

Usually these vents end up over the bed slide portion of the bed. This model is exhaust only, so if you crack a window, it will draw air through.

Maxxair Model : 4401

Usually these fans end up over the slide portion of the bed. This model is intake and exhaust, so if you crack a window, it will draw air through or you can have it blow on you while you sleep!

Maxxair Model : 4000

Add a MC4 positive and negative connector solar port to the roof. We wire them back to the driver's side rear of the camper for easy hook-up for whatever system you install down the road.

Note: 10AWG 600V wire

Center-slide front window.

38" Wide x 13" High

Center slides open to 14" wide x 13" high

Second image demonstrating a 200lb self proclaimed "body builder" passing through the window.

If you want a non-sliding window in the front or rear, this is the one!

24" Wide x 14" Tall

We can do a couple different windows in the sides.

24" Wide x 14" Tall

20" Wide x 12" Tall

Put some windows in your barn doors! If you have a window in the front, you can see the car behind you!

36" Wide x 18" Tall. Half of it slides open. There is bug netting on the part that opens, so you don't have to worry about mosquitos getting in or your dog getting out!

Show the people behind you that you mean business!

They make opening and closing the camper extremely easy. We highly recommend these on all campers but are absolutely recommended on full-size campers!

Have us mount an awning. We move one of the side latches forward, add some more studs, and mount your awning.

*Please confirm your awning with us before purchasing. We are not able to install certain awnings for weight, height, and length reasons.

We know it's expensive, but it requires a bunch of work to make it come together.

Note: Awnings NEED to be put away whenever you walk away from camp or have the slightest amount of wind.

Folding counter that stores against the camper wall when you're driving or hauling stuff. Designed to be used while standing or laying in bed while watching a movie.

Dimensions: 16" Deep x 36" Wide

AT Overland NATO Jerry can holder mounted wherever you want!

We have mounts for 5 or 10 pounders. Mount them on the side!

5lb = 8" diameter

10lb = 9" diameter

Composite-quilt insulation liner that hangs inside the camper canvas. It creates dead airspace and keeps you warmer/colder.

We recommend you take it down before closing the camper top.

Clean up the roof bars with a fabric headliner!

Gray stretch fabric.

The 2.5” medium-firm foam mattress halves come wrapped in a fullyremovable waterproof cover. The PVC-backed canvas is mold and UVresistant. Its 100% polyester construction and beefy YKK zippers make sureit lasts for years of use and abuse.

Note: We are able to do custom requests. Some requests are not possible, but some are. If you're interested in a custom hatch size, Arctic Tern window, L-tracks or some other random add-on, please let us know so we can see if it's possible!